Magnetic Flow Meters
By Flow-Tech Industries
Flow-Tech Industries brings you the latest in flow metering technology with magnetic flow meters that are suited to a variety of applications.
Magnetic flow meters are capable of handling:
- High percentage of solids: Sludges, slurries, minerals, paper, sewage - flows with high levels of solids which cannot be measured other types of meters.
- Obstructionless measurement: Nothing projects into the flow stream, no head loss and no parts to maintain.
- Very corrosive liquids: Acids, caustics and corrosive chemical additives are isolated from the meter by inert linings and electrodes.
- Conductive Liquids: Liquids where conductivity is at sufficient levels to induce measurable voltage.
Our product lines feature:
- Accuracy ±0.5% of rate
- Repeatability ±0.1% of full scale
- The most advanced self-diagnostic package in the industry today
- NEMA-4X/NEMA-7 enclosure
- Flanged and wafer styles, 0.1" to 72"
- Materials: Liners: Ceramic, Teflon®, Polyurethane, Ebonite, Polypropylene
- Electrodes: 316 SS, Hastelloy C, Titanium, Tantalum, Platinum
Magnetic Flow Meter Brands Available:
ELSTER AMCO/ABB MagMaster
- Self-contained battery powered or external AC power
- 2 inch to 12 inches in line size
- Flow rates from minimum 0.23 GPM to an maximum 11,190 GPM
- Pressures to 150 PSI
Sparling Magmeters
- High DC excitation to cut through high levels of inherent "noise"
- Accuracy ±0.5% of rate
- Repeatability ±0.1% of full scale
- The most advanced self-diagnostic package in the industry today
- NEMA-4X/NEMA-7 enclosure STANDARD
- Mag-CommandTM meter programming menus
- Flanged and wafer styles, 0.5" to 48"
Liquid Controls
- No moving parts
- Wide range of nominal diameters from 1/8" to 80"
- Wide range of flow rates from 0.11 GPM to 400,000 GPM
- Wide range of liner and electrode materials
- Near zero pressure drop
- Easy installation and operation
- Minimal maintenance
- Accuracy is not affected by fluid characteristics such as viscosity, density, temperature or suspended solids
Endress+Hauser
- Transmitters for all standard applications and for custody transfer
- Two-line, backlit display
- Pushbutton controls
- Nominal diameters DN 15...600 (1/2...24")
Endress+Hauser flow meters are also used for custody transfer PTFE and PFA liners for all applications in the chemical and process industry (PFA is especially for high process temperatures / severe temperature shocks -40...+180 °C / -40...+355 °F)